Facebook Subscribe

Energy saving LED lamps

valid xhtml 1.0
valid css 2.1

Phantom Lighting - Tips from the Manufacturer

Original lighting fixture manufacturer specializing in fine art lighting, art lights, picture lighting as well as custom cabinet lights, shelf lighting, cove lights and low voltage display illumination. - See The Light, Not The Fixture!

Thursday, January 14, 2010

 

Phantom LED Festoon Lamps


When LED energy saving festoon lamps were invented just a few years ago, they changed decorative lighting forever. Up until this time, it was always something of an expensive chore to light ceiling, cabinets, bookshelves, and special displays with incandescent and xenon lamps. Any attempt to use cheaper lights like fluorescents in cove lighting yielded bright light but very little decorative ambience. It was always this tradeoff between quality and power savings.

Before LED festoon lamps, there was also another problem with heat. Incandescents produce a light that is very similar to that of the sun. They can also get very hot. The issue here is not so much one of fire hazard but rather overheating a room in general. The AC is going to kick in when the thermostat rises, and the cost of cooling the room down is going to compound on top of the cost it.

Linear lighting with 5-7 watt festoon lamps will overheat a room quickly. Just one watt of power emits 1 BTU in heat. Multiply that by 5 watts per lamp, and you can see how hot your room gets, and how much extra you have to pay to cool it down.

This all changed when LED festoons came on the scene. They made decorative lighting affordable. LEDs typically use 60% less electricity as incandescent lamps. However, heat was still an issue in spite of the power savings. While LED light bulbs did not produce heat, the printed circuit boards that power them do —even those with lamps of less than 5 watts of power.

However, things have changed again thanks to Phantom Lighting’s LED replacement festoon lamps. Each of these new lamps requires only .6 watt of power. This results in negligible heat output, which in turn offsets the cost of cooling a room. The savings curve is even greater, and the quality of the lighting is greater as well.

The new 6-emitter led lamp design emits plenty of light in a 120 degree pattern of distribution and a better blend of color temperature. Our lamps also emit 5 times the amount light as competing models. Phantom LEDs, you can have the same lumens output as incandescent and xenon without the additional costs.

Phantom LED cove lights are available in superb color temperatures of 3500K, cool white 5000K, and 2700K. They operate at a CRI of 80 and also have a 50,000 hour average lamp life. They can be retrofitted to linear strip lights made by almost any lighting manufacturer, and they can work on either 12V or 24V magnetic lighting transformers without any need to rewire your fixtures. This means you do not have to buy new strip lighting fixtures. You only need remove your original festoons and replace them with Phantom LED lamps to make the switch.

Phantom lights are ideal for under cabinet lighting, display cabinet lighting, and custom furniture lighting. They have also proven valuable in nautical lighting, aviation lighting, and under the adjustable shelf lighting applications.

Contact Phantom Lighting now toll-Free at 1-800-863-1184. Speak to a US lighting sales representative today about specific strip lighting series and the many aesthetic and practical benefits that led light bulbs add to display and showcase lighting on all levels of function and form.

You can also subscribe to our RSS feed, request literature on our main website, visit our Phantom Lighting mobile website, or read through the many informative summaries and frequently asked questions located on our Phantom Lighting blog.

Together, the professionals at Phantom Lighting will ensure that your next project is an astounding success!

Labels: , , , , , ,


Friday, January 08, 2010

 

LED Cove Lights & Cove Lighting


LED cove lights are highly decorative and have to be able to generate the ambient warmth associated with high-end linear lighting. When building cove lights they also have to be bright enough to effectively compliment general room lighting and contribute noticeable quality to the decorum of interior architecture.

Now when we talk about quality, we have to step back and identify the type of quality we are looking to define. Are we talking about the actual amount of light? Are we talking LED energy savings lamps? Is color rendering or color temperature our primary concern?

Each one of these variables represents a different set of considerations that go into selecting a light source. Historically, cove lights prior to LED have been based on the following technologies, all of which had their unique benefits.

     • Cold cathode and fluorescent lamps tended to produce the brightest light.
     • Incandescent lights known for their golden hue
     • Xenon lights used for high-quality lighting with a distinctively white color to their luminance

Although only capable of producing a pale bluish light in their early days, newer generations of LED linear lighting strips have now begun operating at color temperatures comparable to incandescent. People tend to judge the quality of a light by incandescent because this was the very first type of light invented, and it was used for most of the 20th century.

While it is true LEDs have grown competitively warm in color temperature, only Phantom cove LED accent lights now equal both the warmth and ambience of incandescent lights and the brightness of xenon lamps. The added advantage we offer an equally decorative and truly energy conscious solution that saves money and drastically slashes maintenance and replacement costs.

In fact, our level of quality has earned a reputation for warmth, mood, and ambience in the most high-end display, cabinet, and cove lighting applications. Our color temperatures (LED comparison chart) start from the very warm 2700K, which is virtually identical to incandescent, to the ultra-cool, contemporary 5000K.

The success of our Phantom LED lighting lies in the unique engineering of our festoon lamps. We do not use 5mm “toppled” LEDs like other linear strip light manufacturers use. Such a configuration never results in any more than 5 to maybe 10 lumens in the best of possible worlds.

On the other hand, Phantom LED cove lights have always output over 40 lumens per festoon—and this was with our original festoon design, which has now been redesigned for even greater performance!

Our first LED festoon lamps were comprised of 3 LEDs that operated at a combined 1.7 watts per lamp. We have since doubled the number of LEDs per lamp and simultaneously cut the wattage to only .6 watts. This has negated all but a trace amounts of heat produced by the circuits in the lamps themselves.

These new LED cove lights are a brighter source of light than ever, burn cooler than anything else on the market, and will last longer than anything you buy. Even better, you only need to buy the lamps—not the linear strips themselves. Our festoons are made to retrofit any existing cove lighting system operating at 12V or 24V.

Phantom Lighting is a pioneer, Houston-based art lighting supply company and low voltage cove lighting manufacturer established in 1980 to service the lighting and design community. Phantom Contour Projector and Phantom strip lights feature lighting technology that is completely unique, 100% proprietary, and found nowhere else in the world of lighting. Phantom’s revolutionary approach to decorative picture lighting and low voltage display, shelf, and under cabinet lighting has taken it from humble origins to the level of an international leader in lighting manufacturing on two continents.

We invite you to contact us direct at 800-863-1184 to obtain more information on our LED lamping options. You can also subscribe to our RSS feed, view an LED brochure, check out our Phantom Lighting mobile website, or read through the many informative summaries and Phantom FAQ's located on our Phantom Lighting blog.

Labels: , , , , ,


Thursday, January 07, 2010

 

LED Lamps & LED Light Bulbs


Just a few years ago, LED Lamps changed the world of decorative lighting. Previous to the rise of LED lamps, décor always came with a rather hefty price tag. Incandescent sources simply used too much power and cost too much to operate. They also burned very hot and increased cooling costs.

Linear lighting with 5-7 watt lamps will overheat a room quickly. Just one watt of power emits 1 BTU in heat. Multiply that by 5 watts per lamp, and you can see how hot your room gets, and how much extra you have to pay to cool it down.

This all changed when  Phantom LED lamps emerged. LED made decorative lighting affordable. LED lamps use less than 60% as much electricity as incandescent lamps. LED cove lighting fixtures, for example, did not produce heat, but the printed circuit boards that operated them did. Heat was still an issue—even with lamps of less than 5 watts of power.

Phantom Lighting’s new LED replacement festoon lamp now introduces a new generation of decorative luminance that requires less than 1 watt of power. The heat output is negligible and offsets the cost of cooling the room. Phantom is able to create this savings curve without sacrificing quality. Our 6-bulb design emits plenty of light in a 120 degree pattern of distribution and a better blend of color temperature.

Phantom lamps are engineered to retrofit a wide range of linear strip lights made by a diversity of lighting manufacturers. You only have to remove your original festoons and replace them with Phantom LED lamps. Our technology will adapt to 12V or 24V magnetic transformers, so you do not have to rewire your existing book lighting, cabinet lighting, or cove lighting system. You can also use our LED strip lighting lamp technology for certain nautical lighting, aviation lighting, and under the cabinet lighting applications.

The light output from our festoons is unrivaled in our industry. Most competing festoon designs rely on 5mm, “Toppled” LEDs. A single one of these bulbs only emits 1-1.5 lumens. The most you can expect is 10 lumens total output. This is far weaker than incandescent and xenon and often causes a homeowner or procurement manager to invest in older technology that is inefficient—just to have more light.

You don’t have to make this compromise with Phantom. Our LED festoon lamp emit 5 times the light as other festoons-- equivalent to traditional lamps. With our LED lamps, you can have the same lumens output as incandescent and xenon without the additional costs.

Phantom energy saving LED lamps operate at a CRI of 80 and range in superb color temperatures of 3500K, cool white 5000K, and 2700K. They also have a 50,000 hour average lamp life as compared to 7,500 hours for incandescent lamps and up to 20,000 hours for Xenon festoon lamps.

We have knowledgable lighting sales representatives in the following regions:


Our LED lighting fixture manufacturing facility is located in Houston Texas. We invite you to contact us direct at 800-863-1184 to obtain more information on our LED lamping options. You can also subscribe to our RSS feed, view an LED brochure, check out our Phantom Lighting mobile website, or read through the many informative summaries and FAQs located on our Phantom Lighting blog.

Labels: , , , ,


This page is powered by Blogger. Isn't yours?