DESCRIPTION
The PHANTOM LED LAMP is a 1.7 watt festoon lamp designed to replace a 5 or 7 watt incandescent or Xenon festoon. It operates on 12VAC, is completely dimmable and utilizes three ½ watt LED’s with tight color binning and CRI around 80. Beam spread is 120 degrees with 60 degree beam spreads available by special order. It has an integrated ribbed thermal design to dissipate heat on the back side of the circuit board improving performance and extending lamp life.

LED COMPARISON
Most competitors LED FESTOON LAMPS use either 5mm or “Toppled” LED’s. Each led may only emit 1 or 1.5 lumens. Therefore, a typical festoon with 5 LED’s only emits maybe 5-10 lumens. PHANTOM LIGHTING uses only the highest quality LED’s with tight lumen and color binning. Our LED Lamp emits up to 5 times the light output of the typical festoons. This is comparable in brightness to a typical 7 watt incandescent or Xenon festoon lamp.

COLOR TEMPERATURES
The PHANTOM LED LAMP comes in a plethora of various color temperatures including Warm White 2950K, 3500K, 5000K and Daylight 6500K. Colored LED lamps include Red, Blue, and Green. Lumen output for the 2950K PHANTOM LED LAMP is 42 lumens, 45 lumens for 3500K, and roughly 50 lumens for the 5000K and 6500K lamps.

OPERATING TEMPERATURE
The PHANTOM LED LAMP has a normal operating temperature range between -40 to 100 F. It produces very little forward moving heat. In terms of actual forward radiated heat, the quantum efficiency is multiple times better than an incandescent or Xenon lamp, so it will roughly radiates the equivalent of a 1 watt light bulb in heat.

LAMP DIMENSIONS
Engineered as a replacement for incandescent and Xenon festoon lamps, the LED lamp from Phantom is 1-11/16” in overall length, 9/16” in width and 3/8” in depth.

LAMP LIFE
The PHANTOM LED LAMP has a 50,000 hour average lamp life as compared to 7,500 hours for incandescent lamps and up to 20,000 hours for Xenon festoon lamps.

TRANSFORMER REQUIREMENTS
The PHANTOM LED LAMP operates at 12 Volt AC and is designed for use on magnetic transformers only.

APPLICATIONS
The PHANTOM LED LAMP may be used in a variety of linear strip lighting products that operate at 12VAC, regardless of the manufacturer. They offer benefits of producing less heat, longer lamp life and lower amperage loads and dimmer requirements. This lamp is perfect for hard to reach cove lighting applications, nautical or aviation needs, sensitive display lighting job, under cabinets or any installation that requires a high performance lighting solution.