TRIM PROFILE

Festoon lamps are available in 3 watt, 5 watt, and 10 watt, in both 12VAC and 24VAC. Xenon lamps (2,800K) typically produce a whiter light and are used for display lighting. The light from an incandescent lamp (2,450K) is warmer in color, and more conducive to residential applications. The average life for a incandescent lamp is 7,500 hours and 20,000 hours for xenon low voltage lamps. LED festoon lamps are available in a 0.6 watt, 12VAC or 24VAC models in several popular color temperatures such as 2,700K, 3,500K and 5,000K. LED festoon lamps produce very little forward throw heat, no UV rays and have an average lamp life of 50,000 hours. LED festoon lamps are perfect for retrofit applications or new projects that require a bright, efficient light source in hard to reach areas.

Dual Fixtures
The Phantom fixture can be attached behind both vertical stiles, sending light in each direction.

Space Requirement
On a cabinet with adjustable shelves, 1” clearance is required between the back surface of the stile and the front of the shelf. This provides the space to move shelves without modifying the Phantom fixture.

Concealed Wiring
For fixed shelving, furniture or retrofit applications it may be necessary to conceal wiring from individual fixtures back to the transformer. We are happy to manufacture your lighting strips with long leads to accommodate any application.

Transformer (Remote Mount)
Magnetic transformers are sized to match the total wattage of your lighting load and come equipped with one or more secondary circuit breakers. (See transformer sheet for more sizing information and amperage calculations)

Dimmer Controls (by others)
Magnetic low voltage transformers should always be used with a dimmer designated for magnetic or inductive loads. Electronic transformers should always be used with a dimmer designated for electronic loads.

To figure total requirements for transformers, calculate total watts per foot divided by voltage equals total amperage. (watts / voltage = amperage). Refer to the table to calculate wire size and fusing requirements or see transformer page for more specific details.