In many cases, it is best to let an electrician place fixtures, but ambitious do-it-yourselfers wondering how to install cove lighting will find that it can be done without professional assistance. However, before beginning this project, a homeowner needs to be aware of all safety concerns and possess some basic tool handling skills. To complete the project, a power drill, screwdriver, hammer, wire cutters, Rawl plugs, screws, straightedge, pencil, wire brackets and a ladder will be needed. Of course, the fixtures themselves will be required, and it’s best to keep some decorative molding on hand to improve the look once the fixtures are placed.
The first, and most important, step in how to best install cove lighting is plotting. Before buying the fixtures or preparing the area for placement, determine where the fixtures will go in the room and measure out how many will be needed. These fixtures are normally sold in strips and ropes, so the most important measurement to take down is the number of linear feet needed. Once the fixtures are procured, place them where they will go, but don’t secure them with screws or nails. Instead, sketch out their footprint and make special note of where the screw will need to be placed. This will serve as a guide for precise installations. Use the straightedge to verify that all lines are straight and aligned.
Once the area is sketched out in pencil, take the power drill and drill holes where indicated in the sketch. Some kinds of masonry may require the use of Rawl plugs to maintain a stable hole. When all of the holes are drilled, the strip can be placed using the screwdriver and screws. The strip will form the base that the fixtures will rest on and should be secured tightly to the ceiling or wall. Homeowners often wonder how to install cove lighting without the strips looking like an eyesore. Some choose to paint over the strips, and while this can improve the look, it’s better to place some decorative molding once the bulbs are in place.
When the strips are secured, it’s time to place the bulbs. This is usually one of the easiest parts of the process for homeowners who want to know how to install cove lighting. The strips usually come with ports that the fixtures can be screwed into easily. However, wiring the lamps does require some expertise and care if they will be hooked up to a dimmer switch, because this requires some threading behind the wall.
These are just the basics of placing a strip or rope fixture. For the best results or complex installations, a professional should be contacted for expert guidance.